FLx800™ Multi-Detection Microplate Reader
|
Specifications
| Detection method | Fluorescence, Luminescence: Low Noise Photomultiplier tube |
| Read method | Endpoint, kinetic and area scanning under computer control |
| Microplate types | 6- to 384-well plates, PCR plates (FLx800TBP) |
| Reading speed | Kinetic, full 96-well plate in <35 seconds (depends on settings) |
| Wavelength range | Excitation: 300-650 nm Emission: 300-700 nm (300-800 nm with optional PMT) |
| Wavelength selection | Deep blocking interference filters |
| Filter wheel capacity | Excitation: 4 positions, Emission: 4 positions |
| Filters supplied | 2 excitation and 2 emission filters |
| Bandpass | Variable, dependent on filter |
| Dynamic range | 0-99.999 RFUs 0-99.999 RLUs |
| Sensitivity | Sodium fluorescein 2.5 pg/ml SF (1.3 fmol/well) typical* Luciferase 0.1 pg/well typical ATP 100 amol/well limit of detection (*Black plate, top measurement, 3mm diameter probe) |
| Standard probes | 3.0 mm top 5.0 mm bottom |
| Light source | Tungsten Halogen, 1000 hours lifetime |
| Temperature control | 4oC above ambient to 50oC (I models) |
| Shaking | Linear shaking (I models) |
| Reagent dispensers | 1 syringe pump |
| Dispense volume | 5-1000 µl in 1 µl increments |
| Onboard software | 55 user-programmable protocols |
| PC Software | KCjunior, Gen5 (optional) |
| Power | 100-240 VAC 50/60 Hz |
| Dimensions | 15" W x 16" D x 9" H (38.1 x 40.64 x 22.89 cm) |
| Weight | 30 lbs (13.6 kg) |
| Regulatory | For in-vitro diagnostic use (Except in the European Union). All BioTek microplate instrumentation is CE and ETL marked. For details on approvals and standards compliance, please contact BioTek. |
Specifications subject to change.
