.

Find Us On...
Find www.labtech.co.uk on TwitterFind www.labtech.co.uk on FacebookFind www.labtech.co.uk on LinkedIn
User login
Shopping cart
View your shopping cart.
Home

Summary

SKU: For ordering information see below
BT37 Benchtop CO2 incubator

The Planer benchtop incubator is primarily designed to grow and maintain cell cultures, particularly for IVF, stem cell or applications where temperature uniformity is of paramount importance. The incubator will keep cells at an optimal temperature, humidity and gas content by maintaining a constant and clean environment for the embryo. The most common parameters for human work are 37°C, 5% CO2 in air and near 100% relative humidity.
 
Features and benefits
 

  • Accurate temperature and humidified gas controlled environment in a small benchtop device.
  • Each chamber tempeature can be set independently.
  • Flexible – Accepts a wide selection of culture dishes.
  • Secure – All critical operating parameters are password protected to prevent accidental or unauthorized modification.
  • Simple & intuitive – Easy to use 2 line display with an 3 button user interface.
  • Clear – Unambiguous status indicators visible from across the lab.

Specifications

Specifications: 

Physical

 

 

Dimensions

420 mm wide x 270 mm deep x 210 mm high

Weight

15.5kg

Storage temperature

10°C to +50°C

Storage humidity

5% to 95% relative humidity non-condensing

Operating environment

For indoor use only

Operating temperature

+5°Cto+40°Cforsafeoperation.Seealso temperature control range restriction

Operating humidity

5% to 90% relative humidity noncondensing

Altitude

up to 2000 m

Pollution degree

Pollution degree 2 (BS EN610101)

Control

 

 

Temperature control range

Ambient + 5°C) to 40°C

Temperature measurement

±0.2°C

Temperature control accuracy

±0.1°C measured after any transient effects due to setpoint changes have subsided

Flow control range

0 ml/minute to 900 mL/minute Flow measurements are normalised to 0oC, 50% RH and 1 bar

Flow accuracy

The greater of ±10% or ±0.3ml/minute

Flow control accuracy

The greater of ±5% or ±0.2ml/minute measured after any transient effects due to setpoint changes have subsided

 

 

Capacity

 

 

Dishes per chamber

4 x NUNC 4 well dishes

4 x NUNC 60 mm dishes

10 x NUNC 30 mm dishes

4 x MINITUB 5 well dishes

4 x FALCON 60 mm dishes

4 x FALCON 60mm single – well “organ culture” dishes

Gas supply

 

 

Gas supply

Premixed gas.Typically 6% CO2, 5% O2, balance N2

Supply pressure

1.5 ± 0.15 bar

Connectors

SWAGELOK 1/4” fitting

Alarms

 

 

Alarms

The incubator provides 3 volt free terminals which provide normally-open and normally- closed contacts

Remote monitoring

 

 

LAN

10 Base T Ethernet RJ45 shielded. ModbusTCPIP protocol

Remote PT100 sensors

PT100 Class A to EN60751. In order to fit the monitoring ports the sensor must meet the following specification: